34,333
edits
Changes
Created page with "<br><br> The previous chapters have introduced the key features of the ConstraintLayout class and outlined the best practices for ConstraintLayout-based user interface design..."
<br><br>
The previous chapters have introduced the key features of the ConstraintLayout class and outlined the best practices for ConstraintLayout-based user interface design within the Android Studio Layout Editor. Although the concepts of ConstraintLayout chains and ratios were outlined in the chapter entitled A Guide to the Android ConstraintLayout, we have not yet addressed how to make use of these features within the Layout Editor. The focus of this chapter, therefore, is to provide practical steps on how to create and manage chains and ratios when using the ConstraintLayout class.
== Creating a Chain ==
Although improved support for chains is expected in future editions of Android Studio, the current Android Studio 2.3 release does not provide extensive support for visually creating ConstraintLayout chains within the Layout Editor tool. That being said, chains may be implemented by adding a few lines to the XML layout resource file of an activity or by using a shortcut involving use of the Layout Editor Design mode Center Horizontally or Center Vertically menu options.
Consider a layout consisting of three Button widgets constrained so as to be positioned in the top-left, top-center and top-right of the ConstraintLayout parent as illustrated in Figure 19 1:
[[Image:|A ConstraintLayout chain in the Android Studio layout editor]]
Figure 19-1
To represent such a layout, the XML resource layout file might contain the following entries for the button widgets:
<pre>
<Button
android:text="Button1"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button1"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginLeft="8dp"
android:layout_marginTop="16dp"
android:layout_marginStart="16dp"
app:layout_constraintLeft_toLeftOf="parent" />
<Button
android:text="Button2"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button2"
android:layout_marginTop="16dp"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintRight_toLeftOf="@+id/button3"
android:layout_marginRight="8dp"
app:layout_constraintLeft_toRightOf="@+id/button1"
android:layout_marginLeft="8dp" />
<Button
android:text="Button3"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button3"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginTop="16dp"
android:layout_marginRight="16dp"
android:layout_marginEnd="16dp"
app:layout_constraintRight_toRightOf="parent" />
</pre>
As currently configured, there are no bi-directional constraints to group these widgets into a chain. To address this, additional constraints need to be added from the right-hand side of button1 to the left side of button2, and from the left side of button3 to the right side of button2 as follows:
<pre>
<Button
android:text="Button1"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button1"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginLeft="8dp"
android:layout_marginTop="16dp"
android:layout_marginStart="16dp"
app:layout_constraintLeft_toLeftOf="parent"
app:layout_constraintRight_toLeftOf="@id/button2" />
<Button
android:text="Button2"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button2"
android:layout_marginTop="16dp"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintRight_toLeftOf="@+id/button3"
android:layout_marginRight="8dp"
app:layout_constraintLeft_toRightOf="@+id/button1"
android:layout_marginLeft="8dp" />
<Button
android:text="Button3"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button3"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginTop="16dp"
android:layout_marginRight="16dp"
android:layout_marginEnd="16dp"
app:layout_constraintRight_toRightOf="parent"
app:layout_constraintLeft_toRightOf="@id/button2" />
</pre>
With these changes, the widgets now have bi-directional horizontal constraints configured. This essentially constitutes a ConstraintLayout chain which is represented visually within the Layout Editor by chain connections as shown in Figure 19-2 below. Note that in this configuration the chain has defaulted to the spread chain style.
[[Image:|A ConstraintLayout chain created in Android Studio]]
Figure 19-2
Although the bi-directional constraints have been added manually via the XML code in this example, it is also useful to know that bi-directional constraints may also be added by selecting all of the widgets to be included in the chain, right-clicking on one of the widgets and selecting either the Center Horizontally or Center Vertically menu option (depending on whether a horizontal or vertical chain is being created).
== Changing the Chain Style ==
If no chain style is configured, the ConstraintLayout will default to the spread chain style. The chain style can be altered by selecting any of the widgets in the chain and clicking on the chain button as highlighted in Figure 19 3:
[[Image:|The Android Studio layout editor chain button]]
Figure 19-3
Each time the chain button is clicked the style will switch to another setting in the order of spread, spread inside and packed.
Alternatively, the style may be specified in the properties tool window by clicking on the View all properties link, unfolding the Constraints section and changing either the layoutConstraintHorizontal_chainStyle or layoutConstraintVertical_chainStyle property depending on the orientation of the chain:
[[Image:|Setting the chain style in the properties panel]]
Figure 19-4
== Spread Inside Chain Style ==
Figure 19 5 illustrates the effect of changing the chain style to spread inside chain style using the above techniques:
[[Image:|ConstraintLayout spread inside chain style]]
Figure 19-5
== Packed Chain Style ==
Using the same technique, changing the chain style property to packed causes the layout to change as shown in Figure 19-6:
[[Image:|ConstraintLayout packed chain style]]
Figure 19-6
== Packed Chain Style with Bias ==
The positioning of the packed chain may be influenced by applying a bias value. The bias can be any value between 0.0 and 1.0, with 0.5 representing the center of the parent. Bias is controlled by selecting the chain head widget and assigning a value to the layout_constraintHorizontal_bias or layout_constraintVertical_bias attribute in the Properties panel. Figure 19 7 shows a packed chain with a horizontal bias setting of 0.2:
[[Image:]]
Figure 19-7
== Weighted Chain ==
The final area of chains to explore involves weighting of the individual widgets to control how much space each widget in the chain occupies within the available space. A weighted chain may only be implemented using the spread chain style and any widget within the chain that is to respond to the weight property must have the corresponding dimension property (height for a vertical chain and width for a horizontal chain) configured for match constraint mode. Match constraint mode for a widget dimension may be configured by selecting the widget, displaying the Properties panel and changing the dimension to 0dp. In Figure 19-8, for example, the layout_width constraint for button1 has been set to 0dp to indicate that the width of the widget is to be determined based on the prevailing constraint settings:
[[Image:|Setting the layout width of a widget to match constraints mode]]
Figure 19-8
Assuming that the spread chain style has been selected, and all three buttons have been configured such that the width dimension is set to match the constraints, the widgets in the chain will expand equally to fill the available space:
[[Image:|ConstraintLayout chain with all widgets set to match constraints]]
Figure 19-9
The amount of space occupied by each widget relative to the other widgets in the chain can be controlled by adding weight properties to the widgets. Figure 19 10 shows the effect of setting the layout_constraintHorizontal_weight property to 4 on button1, and to 2 on both button2 and button3:
[[Image:|An Android ConstraintLayout chain with weights]]
Figure 19-10
As a result of these weighting values, button1 occupies half of the space (4/8), while button2 and button3 each occupy one quarter (2/8) of the space.
== Working with Ratios ==
ConstraintLayout ratios allow one dimension of a widget to be sized relative to the widget’s other dimension (otherwise known as aspect ratio). An aspect ratio setting could, for example, be applied to an ImageView to ensure that its width is always twice its height.
A dimension ratio constraint is configured by setting the constrained dimension to match constraint mode (by setting the dimension to 0dp as outlined in the previous section) and configuring the layout_constraintDimensionRatio attribute on that widget to the required ratio. This ratio value may be specified either as a float value or a width:height ratio setting. The following XML excerpt, for example, configures a ratio of 2:1 on an ImageView widget:
<pre>
<ImageView
android:layout_width="0dp"
android:layout_height="100dp"
android:id="@+id/imageView"
app:layout_constraintDimensionRatio="2:1" />
</pre>
The above example demonstrates how to configure a ratio when only one dimension is set to match constraints. A ratio may also be applied when both dimensions are set to match constraint mode. This involves specifying the ratio preceded with either an H or a W to indicate which of the dimensions is constrained relative to the other.
Consider, for example, the following XML excerpt for an ImageView object:
<pre>
<ImageView
android:layout_width="0dp"
android:layout_height="0dp"
android:id="@+id/imageView"
app:layout_constraintBottom_toBottomOf="parent"
app:layout_constraintRight_toRightOf="parent"
app:layout_constraintLeft_toLeftOf="parent"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintDimensionRatio="W,1:3" />
</pre>
In the above example the height will be defined subject to the constraints applied to it. In this case constraints have been configured such that it is attached to the top and bottom of the parent view, essentially stretching the widget to fill the entire height of the parent. The width dimension, on the other hand, has been constrained to be one third of the ImageView’s height dimension. Consequently, whatever size screen or orientation the layout appears on, the ImageView will always be the same height as the parent and the width one third of that height.
The same results may also be achieved without the need to manually edit the XML resource file. Whenever a widget dimension is set to match constraint mode, a ratio control toggle appears in the Inspector area of the property panel. Figure 19 11, for example, shows the layout width and height properties of a button widget set to match constraint mode and 100dp respectively, and highlights the ratio control toggle in the widget sizing preview:
[[Image:Toggling the Aspect Ratio Constraint setting in Android Studio]]
Figure 19 11
By default the ratio sizing control is toggled off. Clicking on the control enables the ratio constraint and displays an additional field where the ratio may be changed:
[[Image:|Setting a constraint ratio in Android Studio]]
Figure 19-12
== Summary ==
Both chains and ratios are powerful features of the ConstraintLayout class intended to provide additional options for designing flexible and responsive user interface layouts within Android applications. As outlined in this chapter, the Android Studio Layout Editor has been enhanced for Android Studio 2.3 to make it easier to use these features during the user interface design process.
The previous chapters have introduced the key features of the ConstraintLayout class and outlined the best practices for ConstraintLayout-based user interface design within the Android Studio Layout Editor. Although the concepts of ConstraintLayout chains and ratios were outlined in the chapter entitled A Guide to the Android ConstraintLayout, we have not yet addressed how to make use of these features within the Layout Editor. The focus of this chapter, therefore, is to provide practical steps on how to create and manage chains and ratios when using the ConstraintLayout class.
== Creating a Chain ==
Although improved support for chains is expected in future editions of Android Studio, the current Android Studio 2.3 release does not provide extensive support for visually creating ConstraintLayout chains within the Layout Editor tool. That being said, chains may be implemented by adding a few lines to the XML layout resource file of an activity or by using a shortcut involving use of the Layout Editor Design mode Center Horizontally or Center Vertically menu options.
Consider a layout consisting of three Button widgets constrained so as to be positioned in the top-left, top-center and top-right of the ConstraintLayout parent as illustrated in Figure 19 1:
[[Image:|A ConstraintLayout chain in the Android Studio layout editor]]
Figure 19-1
To represent such a layout, the XML resource layout file might contain the following entries for the button widgets:
<pre>
<Button
android:text="Button1"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button1"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginLeft="8dp"
android:layout_marginTop="16dp"
android:layout_marginStart="16dp"
app:layout_constraintLeft_toLeftOf="parent" />
<Button
android:text="Button2"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button2"
android:layout_marginTop="16dp"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintRight_toLeftOf="@+id/button3"
android:layout_marginRight="8dp"
app:layout_constraintLeft_toRightOf="@+id/button1"
android:layout_marginLeft="8dp" />
<Button
android:text="Button3"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button3"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginTop="16dp"
android:layout_marginRight="16dp"
android:layout_marginEnd="16dp"
app:layout_constraintRight_toRightOf="parent" />
</pre>
As currently configured, there are no bi-directional constraints to group these widgets into a chain. To address this, additional constraints need to be added from the right-hand side of button1 to the left side of button2, and from the left side of button3 to the right side of button2 as follows:
<pre>
<Button
android:text="Button1"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button1"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginLeft="8dp"
android:layout_marginTop="16dp"
android:layout_marginStart="16dp"
app:layout_constraintLeft_toLeftOf="parent"
app:layout_constraintRight_toLeftOf="@id/button2" />
<Button
android:text="Button2"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button2"
android:layout_marginTop="16dp"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintRight_toLeftOf="@+id/button3"
android:layout_marginRight="8dp"
app:layout_constraintLeft_toRightOf="@+id/button1"
android:layout_marginLeft="8dp" />
<Button
android:text="Button3"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:id="@+id/button3"
app:layout_constraintTop_toTopOf="parent"
android:layout_marginTop="16dp"
android:layout_marginRight="16dp"
android:layout_marginEnd="16dp"
app:layout_constraintRight_toRightOf="parent"
app:layout_constraintLeft_toRightOf="@id/button2" />
</pre>
With these changes, the widgets now have bi-directional horizontal constraints configured. This essentially constitutes a ConstraintLayout chain which is represented visually within the Layout Editor by chain connections as shown in Figure 19-2 below. Note that in this configuration the chain has defaulted to the spread chain style.
[[Image:|A ConstraintLayout chain created in Android Studio]]
Figure 19-2
Although the bi-directional constraints have been added manually via the XML code in this example, it is also useful to know that bi-directional constraints may also be added by selecting all of the widgets to be included in the chain, right-clicking on one of the widgets and selecting either the Center Horizontally or Center Vertically menu option (depending on whether a horizontal or vertical chain is being created).
== Changing the Chain Style ==
If no chain style is configured, the ConstraintLayout will default to the spread chain style. The chain style can be altered by selecting any of the widgets in the chain and clicking on the chain button as highlighted in Figure 19 3:
[[Image:|The Android Studio layout editor chain button]]
Figure 19-3
Each time the chain button is clicked the style will switch to another setting in the order of spread, spread inside and packed.
Alternatively, the style may be specified in the properties tool window by clicking on the View all properties link, unfolding the Constraints section and changing either the layoutConstraintHorizontal_chainStyle or layoutConstraintVertical_chainStyle property depending on the orientation of the chain:
[[Image:|Setting the chain style in the properties panel]]
Figure 19-4
== Spread Inside Chain Style ==
Figure 19 5 illustrates the effect of changing the chain style to spread inside chain style using the above techniques:
[[Image:|ConstraintLayout spread inside chain style]]
Figure 19-5
== Packed Chain Style ==
Using the same technique, changing the chain style property to packed causes the layout to change as shown in Figure 19-6:
[[Image:|ConstraintLayout packed chain style]]
Figure 19-6
== Packed Chain Style with Bias ==
The positioning of the packed chain may be influenced by applying a bias value. The bias can be any value between 0.0 and 1.0, with 0.5 representing the center of the parent. Bias is controlled by selecting the chain head widget and assigning a value to the layout_constraintHorizontal_bias or layout_constraintVertical_bias attribute in the Properties panel. Figure 19 7 shows a packed chain with a horizontal bias setting of 0.2:
[[Image:]]
Figure 19-7
== Weighted Chain ==
The final area of chains to explore involves weighting of the individual widgets to control how much space each widget in the chain occupies within the available space. A weighted chain may only be implemented using the spread chain style and any widget within the chain that is to respond to the weight property must have the corresponding dimension property (height for a vertical chain and width for a horizontal chain) configured for match constraint mode. Match constraint mode for a widget dimension may be configured by selecting the widget, displaying the Properties panel and changing the dimension to 0dp. In Figure 19-8, for example, the layout_width constraint for button1 has been set to 0dp to indicate that the width of the widget is to be determined based on the prevailing constraint settings:
[[Image:|Setting the layout width of a widget to match constraints mode]]
Figure 19-8
Assuming that the spread chain style has been selected, and all three buttons have been configured such that the width dimension is set to match the constraints, the widgets in the chain will expand equally to fill the available space:
[[Image:|ConstraintLayout chain with all widgets set to match constraints]]
Figure 19-9
The amount of space occupied by each widget relative to the other widgets in the chain can be controlled by adding weight properties to the widgets. Figure 19 10 shows the effect of setting the layout_constraintHorizontal_weight property to 4 on button1, and to 2 on both button2 and button3:
[[Image:|An Android ConstraintLayout chain with weights]]
Figure 19-10
As a result of these weighting values, button1 occupies half of the space (4/8), while button2 and button3 each occupy one quarter (2/8) of the space.
== Working with Ratios ==
ConstraintLayout ratios allow one dimension of a widget to be sized relative to the widget’s other dimension (otherwise known as aspect ratio). An aspect ratio setting could, for example, be applied to an ImageView to ensure that its width is always twice its height.
A dimension ratio constraint is configured by setting the constrained dimension to match constraint mode (by setting the dimension to 0dp as outlined in the previous section) and configuring the layout_constraintDimensionRatio attribute on that widget to the required ratio. This ratio value may be specified either as a float value or a width:height ratio setting. The following XML excerpt, for example, configures a ratio of 2:1 on an ImageView widget:
<pre>
<ImageView
android:layout_width="0dp"
android:layout_height="100dp"
android:id="@+id/imageView"
app:layout_constraintDimensionRatio="2:1" />
</pre>
The above example demonstrates how to configure a ratio when only one dimension is set to match constraints. A ratio may also be applied when both dimensions are set to match constraint mode. This involves specifying the ratio preceded with either an H or a W to indicate which of the dimensions is constrained relative to the other.
Consider, for example, the following XML excerpt for an ImageView object:
<pre>
<ImageView
android:layout_width="0dp"
android:layout_height="0dp"
android:id="@+id/imageView"
app:layout_constraintBottom_toBottomOf="parent"
app:layout_constraintRight_toRightOf="parent"
app:layout_constraintLeft_toLeftOf="parent"
app:layout_constraintTop_toTopOf="parent"
app:layout_constraintDimensionRatio="W,1:3" />
</pre>
In the above example the height will be defined subject to the constraints applied to it. In this case constraints have been configured such that it is attached to the top and bottom of the parent view, essentially stretching the widget to fill the entire height of the parent. The width dimension, on the other hand, has been constrained to be one third of the ImageView’s height dimension. Consequently, whatever size screen or orientation the layout appears on, the ImageView will always be the same height as the parent and the width one third of that height.
The same results may also be achieved without the need to manually edit the XML resource file. Whenever a widget dimension is set to match constraint mode, a ratio control toggle appears in the Inspector area of the property panel. Figure 19 11, for example, shows the layout width and height properties of a button widget set to match constraint mode and 100dp respectively, and highlights the ratio control toggle in the widget sizing preview:
[[Image:Toggling the Aspect Ratio Constraint setting in Android Studio]]
Figure 19 11
By default the ratio sizing control is toggled off. Clicking on the control enables the ratio constraint and displays an additional field where the ratio may be changed:
[[Image:|Setting a constraint ratio in Android Studio]]
Figure 19-12
== Summary ==
Both chains and ratios are powerful features of the ConstraintLayout class intended to provide additional options for designing flexible and responsive user interface layouts within Android applications. As outlined in this chapter, the Android Studio Layout Editor has been enhanced for Android Studio 2.3 to make it easier to use these features during the user interface design process.
