34,333
edits
Changes
New page: Although Linux is increasingly making inroads into the desktop market, its origins are very much server oriented. It is not surprising, therefore, that Linux has the ability to act as a fi...
Although Linux is increasingly making inroads into the desktop market, its origins are very much server oriented. It is not surprising, therefore, that Linux has the ability to act as a file server. Files on a Linux system can be accessed both from other Linux (and UNIX) systems and Windows based systems over network connections.
Remote filesystem access between Linux and UNIX systems is achieved using technology called Network File System (NFS) which is discussed in [[Sharing Ubuntu Linux Folders with Remote Linux and UNIX Systems]]. Windows systems share resources such as filesystems and printers using something called Server Message Block (SMB). In order for a Linux system to serve such resources over a network to a Windows system it must, therefore, support SMB. This is achieved using Linux technology known as ''Samba''.
In this chapter we will look in detail at the steps necessary to share filesystem resources on a Fedora Linux system with remote Windows Systems.
== Installing Samba on a Fedora Linux System ==
The default settings used during the Fedora Linux installation process do not install Samba. Unless you specifically requested that Samba be installed it is unlikely that you have Samba installed on your system. To check whether ''Samba'' is installed, open a terminal window and run the following ''rpm'' command:
<pre>
rpm -q samba
</pre>
If Samba is installed, the rpm command will generate output similar to the following:
<pre>
samba-3.0.25b-2.fc7
</pre>
If Samba is not installed, rpm will return with "package samba is not installed".
If Samba is not installed on your system it can be installed using the yum command-line tool:
<pre>
su -
yum install samba
</pre>
The above command will install both the ''samba'' package and the ''samba-common'' dependency package.
== Starting the Samba Service on Fedora Linux ==
Having installed the Samba service packags the next step is to start those services running. This can be done either from the command line, or from the Service Configuration Tool.
To verify that the Samba service is running from the command-line execute following command from a Terminal window:
<pre>
/sbin/service smb status
</pre>
If the service is ''stopped'' it can be started as follows (note that this command must be performed with super user privileges:
<pre>
su -
/sbin/service smb start
</pre>
Alternatively, to configure the Samba service using the GUI based Service Configuration Tool, select it from the ''System->Administration->Server Settings->Services'' menu. When the tool loads, scroll down the list of services to find ''smb''. Check the box next to the service if you want the service to start on reboot, and then click the ''Start'' button. Check the status panel to the right of the dialog to verify the service is running (a message similar to "smb (pid 543212 is running..." will be displayed).
== Configuring the Fedora Firewall to Enable Samba ==
== Setting Up Ubuntu Linux/Windows File Sharing ==
The sharing of Linux folders with Windows based systems is not installed and configured by default on Ubuntu Linux. Fortunately, attempting to share folders will automatically trigger the installation of the appropriate services.
To begin the process of sharing, select the ''System'' desktop menu, and from the ''Administration'' sub-menu select ''Shared Folders''. Enter your password when prompted to do so. If the services necessary for folder sharing are not installed you will be prompted to install them:
[[Image:ubuntu_sharing_services_not_installed.jpg]]
If you only ever plan to share resources with Windows systems uncheck the NFS box. If you think you may need to share resources with other Linux or UNIX systems make sure both boxes are checked and click on ''Install''.
== Sharing Ubuntu Linux Folders ==
Once the Samba File sharing package has been installed the ''Shared Folders'' dialog will appear. This dialog is used to define which folders may be accessed by remote Windows systems:
[[Image:ubuntu_shared_folders.jpg]]
Click on the ''Add'' button to add a new folder. The following dialog will subsequently appear:
[[Image:ubuntu_shared_folders_add.jpg]]
This dialog is used to define which folder will be shared. Select from the ''Path:''drop down menu. You can select either a user's directory, the root directory (not advised for security reasons) use the ''Other...'' option to browse the file system to find the path you wish to share. Having selected a folder, enter the ''Windows networks (smb)'' for the ''Share through'' option and then provide a resource name by which the folder will be accessed from the Windows system.
Click on ''OK'' when you have configured the information in this dialog and then select the ''General Properties'' of the main ''Shared Folders'' dialog which will display the following options:
[[Image:ubuntu_shared_folders_general.jpg]]
Enter the name of your Windows Workgroup and click on ''Shared Folders'' tab to return to the initial screen.
The final step is to configure a password for samba access to your shared folders. From a terminal window, run the following command (where ''username'' is the username you use to log into your Ubuntu system):
<pre>
sudo smbpasswd -a username
</pre>
Once completed, the folder you specified will be visible from any Windows systems on the same network (and workgroup specified in the General Properties page) as your Ubuntu Linux system. When prompted on the Windows system for the password to access the resource, enter the password defined using smbpasswd above. You should now have remote access to your Linux folder from the Windows system.
Remote filesystem access between Linux and UNIX systems is achieved using technology called Network File System (NFS) which is discussed in [[Sharing Ubuntu Linux Folders with Remote Linux and UNIX Systems]]. Windows systems share resources such as filesystems and printers using something called Server Message Block (SMB). In order for a Linux system to serve such resources over a network to a Windows system it must, therefore, support SMB. This is achieved using Linux technology known as ''Samba''.
In this chapter we will look in detail at the steps necessary to share filesystem resources on a Fedora Linux system with remote Windows Systems.
== Installing Samba on a Fedora Linux System ==
The default settings used during the Fedora Linux installation process do not install Samba. Unless you specifically requested that Samba be installed it is unlikely that you have Samba installed on your system. To check whether ''Samba'' is installed, open a terminal window and run the following ''rpm'' command:
<pre>
rpm -q samba
</pre>
If Samba is installed, the rpm command will generate output similar to the following:
<pre>
samba-3.0.25b-2.fc7
</pre>
If Samba is not installed, rpm will return with "package samba is not installed".
If Samba is not installed on your system it can be installed using the yum command-line tool:
<pre>
su -
yum install samba
</pre>
The above command will install both the ''samba'' package and the ''samba-common'' dependency package.
== Starting the Samba Service on Fedora Linux ==
Having installed the Samba service packags the next step is to start those services running. This can be done either from the command line, or from the Service Configuration Tool.
To verify that the Samba service is running from the command-line execute following command from a Terminal window:
<pre>
/sbin/service smb status
</pre>
If the service is ''stopped'' it can be started as follows (note that this command must be performed with super user privileges:
<pre>
su -
/sbin/service smb start
</pre>
Alternatively, to configure the Samba service using the GUI based Service Configuration Tool, select it from the ''System->Administration->Server Settings->Services'' menu. When the tool loads, scroll down the list of services to find ''smb''. Check the box next to the service if you want the service to start on reboot, and then click the ''Start'' button. Check the status panel to the right of the dialog to verify the service is running (a message similar to "smb (pid 543212 is running..." will be displayed).
== Configuring the Fedora Firewall to Enable Samba ==
== Setting Up Ubuntu Linux/Windows File Sharing ==
The sharing of Linux folders with Windows based systems is not installed and configured by default on Ubuntu Linux. Fortunately, attempting to share folders will automatically trigger the installation of the appropriate services.
To begin the process of sharing, select the ''System'' desktop menu, and from the ''Administration'' sub-menu select ''Shared Folders''. Enter your password when prompted to do so. If the services necessary for folder sharing are not installed you will be prompted to install them:
[[Image:ubuntu_sharing_services_not_installed.jpg]]
If you only ever plan to share resources with Windows systems uncheck the NFS box. If you think you may need to share resources with other Linux or UNIX systems make sure both boxes are checked and click on ''Install''.
== Sharing Ubuntu Linux Folders ==
Once the Samba File sharing package has been installed the ''Shared Folders'' dialog will appear. This dialog is used to define which folders may be accessed by remote Windows systems:
[[Image:ubuntu_shared_folders.jpg]]
Click on the ''Add'' button to add a new folder. The following dialog will subsequently appear:
[[Image:ubuntu_shared_folders_add.jpg]]
This dialog is used to define which folder will be shared. Select from the ''Path:''drop down menu. You can select either a user's directory, the root directory (not advised for security reasons) use the ''Other...'' option to browse the file system to find the path you wish to share. Having selected a folder, enter the ''Windows networks (smb)'' for the ''Share through'' option and then provide a resource name by which the folder will be accessed from the Windows system.
Click on ''OK'' when you have configured the information in this dialog and then select the ''General Properties'' of the main ''Shared Folders'' dialog which will display the following options:
[[Image:ubuntu_shared_folders_general.jpg]]
Enter the name of your Windows Workgroup and click on ''Shared Folders'' tab to return to the initial screen.
The final step is to configure a password for samba access to your shared folders. From a terminal window, run the following command (where ''username'' is the username you use to log into your Ubuntu system):
<pre>
sudo smbpasswd -a username
</pre>
Once completed, the folder you specified will be visible from any Windows systems on the same network (and workgroup specified in the General Properties page) as your Ubuntu Linux system. When prompted on the Windows system for the password to access the resource, enter the password defined using smbpasswd above. You should now have remote access to your Linux folder from the Windows system.