Difference between revisions of "Building and Installing GNUstep on Linux"

Latest revision as of 20:00, 27 October 2016

In Installing and Using GNUstep and Objective-C on Linux, we covered the steps involved in installing the GNUstep environment on Linux distributions for which pre-built GNUstep packages are available. Unfortunately, very few Linux distributions have pre-built packages available making it necessary download and build the GNUstep sources on most systems.

The purpose of this chapter of Objective-C 2.0 Essentials is to outline the steps necessary to download and build the GNUstep sources. The process outlined here is known to work on Fedora, Red Hat Enterprise Linux and CentOS. The steps should be largely similar for other Linux distributions, though the exact command to perform package installations may differ from the one used here. For details on how to install specific packages for your chosen Linux distribution it may be necessary to refer to the corresponding documentation.

Installing gcc and Objective-C Support on Linux

The first step in the build process is to install gcc together with the gcc Objective-C package. These packages are called gcc and gcc-obj respectively and on Red Hat, Fedora and CentOS systems may be installed as follows:

su - 
yum install gcc
yum install gcc-objc

Once installed, the next step is to resolve some additional package dependencies.

Package Dependencies

A Linux distribution is essentially a Linux kernel and a range of packages. Each distribution consists of a vast array of packages, many of which are not installed by default when the operating system is first installed. The idea behind this is to keep the size of the installed operating system to a minimum, encouraging users to only install a package when they actually need it. Consequently, there are many packages upon which GNUstep is dependent that are not installed by default on most Linux systems. Before we can embark on a GNUstep environment build, therefore, it is necessary to install these package dependencies. Fortunately, these can be installed using a single command:

yum install make libpng libpng-devel libtiff libtiff-devel libobjc libxml2 libxml2-devel 
                libX11-devel libXt-devel libjpeg libjpeg-devel

Keep in mind that some of these packages may already be installed, in which case the package manager will simply move on to the next package. In addition, many of these packages will have dependencies of their own which will be added to the installation process automatically.

Once the packages are installed we are ready to download the GNUstep source code.

Obtaining the GNUstep Source Code

• GNUstep Make
• GNUstep Base
• GNUstep GUI
• GNUstep Backend

Each of these packages needs to be built and installed on your Linux system in order to gain access to the full power of Objective-C and to be able to work with the examples in the remainder of this book. Fortunately a single package called GNUstep Startup is provided that contains the source code for all four of the above packages. This package can be downloaded from the GNUstep.org website download page. Be sure to download the latest stable release of the GNUstep Startup software.

Once the package has been downloaded to a suitable work folder it can be unpacked as follows (where <version> is replaced by the version number of the package you downloaded):

tar xvfz gnustep-startup-<version>.tar.gz

The source files will be unpacked into a new directory named gnustep-startup-<version> (once again substituting <version> for the version you downloaded). Change directory into this folder as follows:

cd gnustep-startup-<version>

Configuring the Build Process

Before the build process can be started it must first be configured. This is an automated process that scans the system on which the build is to take place to find out about the packages that are installed and then creates a build configuration file and a Makefile. This configuration is performed by executing the following command in the GNUstep directory created in the previous section of this chapter:

./configure

Building GNUstep

Once the configuration script process is complete it is time to begin the GNUstep build. This is achieved by typing the following command:

make

Once executed, the build process will display an opening message similar to the following:

GNUstep Installation


     This is an automatic installation script for GNUstep.

This script tries to build and install the core libraries for
GNUstep. Log files of the build process are kept so that if some
part of the build does not work, you can send the log files to
our attention (at [email protected]). From these we can try to
determine what the problem is.


Press the Return key to begin continue:

Press any key to continue to the system check phase. At the end of this phase a list of errors and warnings may appear. Any errors will prevent the build from completing and should be addressed before proceeding. These typically involve installation of missing packages. Warnings can usually be ignored without impacting the subsequent build process.

Having reviewed the information provided, press any key to return to the build. The duration of the build will depend on the speed of the system but will usually be completed within a few minutes and display a message containing information some useful information:

---------------------------------------------------------

Installation Finished

---------------------------------------------------------

Now run the GNUstep initialization script (put this in your
.bashrc or other type of startup script). Note the '.' at the
beginning of the line.
. /usr/GNUstep/System/Library/Makefiles/GNUstep.sh

Now you can install some applications and start using GNUstep
Look for a few applications in the AppSources directory. The
typical way to install an application is:
  tar -zxf MyApplication.tar.gz
  cd MyApplication
  make
  make install (as root, unless GNUstep is in your home dir)

Then start the application:
  openapp MyApplication.app

Perhaps the most important piece of information in the above output is the reference to the GNUstep initialization script. This must be run prior to compiling any Objective-C applications and can be placed in the .bashrc startup script in your home directory. Make a note of the location listed in the message on your screen as the exact location may differ from the one shown above.

Testing the Objective-C and GNUstep Installation

Once the installation is complete, it can be tested by opening your favorite editor (if you don't have a favorite try GEdit by selecting Applications->Accessories->Text Editor) and entering some Objective-C code:

#import <Foundation/Foundation.h>

int main (int argc, const char * argv[])
{
        NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];

        NSLog (@"hello world");
        [pool drain];
        return 0;
}

Objective-C source files have a .m file name extension, so save the file as hello.m in a suitable folder such that you will be able to locate the file in the next section.

Compiling Objective-C Code

Before an Objective-C program can be run it must first be compiled. Compilation is a process whereby the human readable Objective-C code in the source file (in our case hello.m) is converted to the machine code understood by the CPU. Prior to performing this compilation, however, the GNUstep environment must first be set up by executing the GNUstep.sh, the location of which was provided at the end of the installation process. Execute this script exactly as outlined in the installation message, for example:

. /usr/GNUstep/System/Library/Makefiles/GNUstep.sh

Failure to execute this script prior to compiling Objective-C code in a Terminal window will result in the compiler reporting errors similar to the following:

error: cannot find interface declaration for ‘NXConstantString’

From within a Terminal window change directory to the where you saved the hello.m source file and execute the following command to compile it:

gcc `gnustep-config --objc-flags` -L/usr/GNUstep/Local/Library/Libraries -lgnustep-base hello.m -o hello

If all goes well, the compilation should complete silently and the test application is ready to run. The program may be executed as follows:

./hello

Executing the program will result in output similar to the following:

2009-09-15 10:48:39.772 prog1[12906] hello world

Assuming you see output similar to the above example, Objective-C and GNUstep are successfully installed on your Linux system and you are ready to continue with the remainder of this book.